{"id":7751,"date":"2023-01-11T13:17:07","date_gmt":"2023-01-11T13:17:07","guid":{"rendered":"https:\/\/elemech.net\/shop\/?post_type=product&p=7751"},"modified":"2023-01-11T13:17:07","modified_gmt":"2023-01-11T13:17:07","slug":"eutectrode-2-26-d-welding-electrodes","status":"publish","type":"product","link":"https:\/\/elemech.net\/shop\/product\/eutectrode-2-26-d-welding-electrodes\/","title":{"rendered":"EutecTrode 2-26 D welding electrodes"},"content":{"rendered":"
HOT WELDING OF GREY CAST IRONS<\/div>\n
The MMA electrode EutecTrode 2-26 D for cast iron hot welding has been specially adapted to the needs and requirements of wind turbine components. The main objective was to achieve a notch bar impact value of > 10 joules at -20 \u00b0 C. The ideal matching of the flux coating formulation around the core rod ensures this requirement. This has been verified in studies by an independent testing laboratory. For cast iron hot welding, the complete component must be slowly preheated to 550 \u00b0C to 700 \u00b0C, once the weld zone has been suitably prepared. After welding, the post-weld heat treatment is performed depending on the base material. The hot welding of cast iron is always recommended if mechanical properties, machinability and colour of the weld metal must reasonably match those of the cast iron workpiece. Also recommended when distortion, deformation or surface oxidation are justifiable up to certain tolerances.<\/div>\n
\n
\n

Applications<\/h3>\n<\/div>\n
\n
    \n
  • Turbine housing<\/li>\n
  • Engine – and gearbox housing<\/li>\n
  • Valve housing<\/li>\n
  • Rotor housing, etc<\/li>\n<\/ul>\n
    \n

    Technical Data<\/h3>\n<\/div>\n
    \n
    \n
    \n
    Weld metal (untreated)<\/div>\n
    Values determined for pure weld metal<\/div>\n<\/div>\n
    \n
    Yield point Rp0,2<\/div>\n
    ~ 325 MPa<\/div>\n<\/div>\n
    \n
    Tensile strength Rm<\/div>\n
    ~ 435 MPa<\/div>\n<\/div>\n
    \n
    Elongation A5<\/div>\n
    ~ 12%<\/div>\n<\/div>\n
    \n
    Notch impact value -20 \u00b0C<\/div>\n
    > 10 J<\/div>\n<\/div>\n
    \n
    Diameter<\/div>\n
    4 and 6 mm<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"
    HOT WELDING OF GREY CAST IRONS<\/div>\n
    The MMA electrode EutecTrode 2-26 D for cast iron hot welding has been specially adapted to the needs and requirements of wind turbine components. The main objective was to achieve a notch bar impact value of > 10 joules at -20 \u00b0 C. The ideal matching of the flux coating formulation around the core rod ensures this requirement. This has been verified in studies by an independent testing laboratory. For cast iron hot welding, the complete component must be slowly preheated to 550 \u00b0C to 700 \u00b0C, once the weld zone has been suitably prepared. After welding, the post-weld heat treatment is performed depending on the base material. The hot welding of cast iron is always recommended if mechanical properties, machinability and colour of the weld metal must reasonably match those of the cast iron workpiece. Also recommended when distortion, deformation or surface oxidation are justifiable up to certain tolerances.<\/div>\n
    \n
    \n

    Applications<\/h3>\n<\/div>\n
    \n
      \n
    • Turbine housing<\/li>\n
    • Engine – and gearbox housing<\/li>\n
    • Valve housing<\/li>\n
    • Rotor housing, etc<\/li>\n<\/ul>\n
      \n

      Technical Data<\/h3>\n<\/div>\n
      \n
      \n
      \n
      Weld metal (untreated)<\/div>\n
      Values determined for pure weld metal<\/div>\n<\/div>\n
      \n
      Yield point Rp0,2<\/div>\n
      ~ 325 MPa<\/div>\n<\/div>\n
      \n
      Tensile strength Rm<\/div>\n
      ~ 435 MPa<\/div>\n<\/div>\n
      \n
      Elongation A5<\/div>\n
      ~ 12%<\/div>\n<\/div>\n
      \n
      Notch impact value -20 \u00b0C<\/div>\n
      > 10 J<\/div>\n<\/div>\n
      \n
      Diameter<\/div>\n
      4 and 6 mm<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n","protected":false},"featured_media":7750,"comment_status":"open","ping_status":"closed","template":"","meta":{"om_disable_all_campaigns":false},"product_cat":[175,170,171],"product_tag":[],"class_list":{"0":"post-7751","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-castolin-eutectic","7":"product_cat-welding","8":"product_cat-welding-electrodes","10":"first","11":"instock","12":"shipping-taxable","13":"product-type-simple"},"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/elemech.net\/shop\/wp-json\/wp\/v2\/product\/7751","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/elemech.net\/shop\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/elemech.net\/shop\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/elemech.net\/shop\/wp-json\/wp\/v2\/comments?post=7751"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/elemech.net\/shop\/wp-json\/wp\/v2\/media\/7750"}],"wp:attachment":[{"href":"https:\/\/elemech.net\/shop\/wp-json\/wp\/v2\/media?parent=7751"}],"wp:term":[{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/elemech.net\/shop\/wp-json\/wp\/v2\/product_cat?post=7751"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/elemech.net\/shop\/wp-json\/wp\/v2\/product_tag?post=7751"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}